After reprocessing cuvettes and rotors since 1982, we at L.E.S.S. are fortunate to have a substantial, loyal customer base.  Various comparative test reports that have been performed over the past years comparing the actual performance of reprocessed cuvettes to new cuvettes attest to the fact that there is no measurable difference between the two.

Reprocessing of cuvettes for medical laboratories represents an excellent opportunity for reducing the cost of health care.  Reprocessing will enhance the environment by eliminating the need for disposing of millions of individual pieces of biohazardous nonbiodegradable plastic each year.  The quality of cuvettes and rotors that undergo our reprocessing methods is well established and accepted by the laboratory community.

The L.E.S.S., Inc. reprocessing method allows the same cuvettes to be decontaminated, thoroughly cleaned, quality inspected and reused from 10 to 100 times.

The reprocessing of cuvettes results in the following benefits:

• Significant savings in the purchase of cuvettes.

• Savings by eliminating the need for the disposal of cuvettes as biohazardous waste.  A traditional method biohazardous waste disposal is a two-step process including incineration and depositing in a landfill.

• Enhancing the environment by eliminating the need for burying millions of non-biodegradable cuvettes in the world's dwindling landfill resources.

• No sacrifice in quality between new and reprocessed cuvettes.
 

To sign up for disposable plastic reprocessing service (click here)